Commentary

Q&A about maple bats

Updated: August 18, 2008, 2:01 PM ET
By Amy K. Nelson | ESPN.com

In search of more information about maple bats, we spoke to players and two experts in the industry -- Chuck Schapp of Louisville Slugger and Sam Holman, owner of The Original Maple Bat Corporation -- for their opinions on the ash vs. maple debate.

1. When were maple bats introduced to Major League Baseball?


It's tough to know the exact date, but Holman says Joe Carter first used a maple bat in a major league game in 1997. Holman, a carpenter from Ottawa, Canada, first met Blue Jays scout Bill MacKenzie in a local watering hole where Holman was asked to make a maple bat. By the end of the 1996 season, Holman and McKenzie went to the Triple-A Ottawa Lynx and got Fernando Seguignol to use a maple bat. Holman thinks Seguignol is the first professional player to homer with a maple bat. By the next season, word about maple bats had spread and big leaguers with the Blue Jays asked for a shipment. Schapp says he first noticed players using maple in 1998, and a year later, Louisville Slugger began production of maple bats.

2. Who makes the maple bats used in Major League Baseball?


MLB has licensed 32 companies to produce maple bats. Louisville Slugger and Rawlings are two of the biggest. Holman's company sells maple bats exclusively.

Official Baseball Rules: 1:10

(a) The bat shall be a smooth, round stick not more than 2 3/4 inches in diameter at the thickest part and not more than 42 inches in length. The bat shall be one piece of solid wood.

NOTE: No laminated or experimental bats shall be used in a professional game (either championship season or exhibition games) until the manufacturer has secured approval from the Rules Committee of his design and methods of manufacture.

(b) Cupped Bats. An indentation in the end of the bat up to one inch in depth is permitted and may be no wider than two inches and no less than one inch in diameter. The indentation must be curved with no foreign substance added.

(c) The bat handle, for not more than 18 inches from its end, may be covered or treated with any material or substance to improve the grip. Any such material or substance, which extends past the 18 inch limitation, shall cause the bat to be removed from the game.

NOTE: If the umpire discovers that the bat does not conform to (c) above until a time during or after which the bat has been used in play, it shall not be grounds for declaring the batter out, or ejected from the game.

(d) No colored bat may be used in a professional game unless approved by the Rules Committee.

3. Where does the maple wood come from?


It depends on the company. For instance, Louisville Slugger has its own wood production company, but also outsources with a few different timber companies, most of them in the New York/Pennsylvania area. Holman uses a company out of the Catskills, which he says produces better quality maple.

4. What are the benefits of using maple over ash?


It's a very subjective decision. Most players prefer the feel of maple over ash; ash bats tend to soften faster than maple. "It gets soft and the grains separate," Schapp says of the ash. But those players who like a little more give in their bats, or what Schapp terms "flex," usually prefer the ash. "For me, it's a feel thing," said Angels second baseman Howie Kendrick, who has used an ash bat his entire career, except in 2006. "I like how the ash has some give." Holman said that Barry Bonds once told him he preferred how the maple didn't bend, so he didn't have to compensate with his swing as much as he did with an ash bat.

5. Are the characteristics of a maple bat any different than those of an ash bat?


Yes and no. Holman says there isn't a larger hitting area on maple bats. Schapp adds that the specs are exactly the same for both woods and that neither one has proven to hit balls any farther than the other. But Angels center fielder Torii Hunter said the only time he used a maple bat (for the month of April this season), he felt the difference in how hard the maple wood made contact with the ball. "It feels like a car crash at full speed," Hunter said. "It's like you killed the ball. [They're] a little more powerful." Kendrick said his ash bat starts to splinter toward the head after just a week of use, and he uses maples exclusively for batting practice, because ash tends to break faster than maple. The irony is that maple bats last much longer, but when they break, it happens with far greater violence.

6. How many major leaguers use maple bats?


It's difficult to know an exact number, but Schapp says that 65 percent of Louisville Sluggers sent to major leaguers are maple. Hunter said he tried maple for a month because of all the hype. He quickly went back to ash. "It's a mental thing," Hunter said. Indians center fielder Grady Sizemore said he used ash for a year, but prefers maple. Sizemore said he couldn't really identify a difference; he just preferred the feel of maple. Because of the recent controversy over the breaking of maple bats, some players have decided to switch back to ash. Schapp said a few months ago Jason Bay decided to go back to ash in part because he wanted to readjust in case maple bats were banned. "I hope they don't decide to get rid of them," Sizemore said.

7. Who are the most noteworthy players using maple?


Manny Ramirez, Prince Fielder, Dustin Pedroia, Jason Giambi are a few. What about the balls that Josh Hamilton hit at Yankee Stadium during the Home Run Derby? Those were hit with an ash bat. Sizemore, Dan Uggla and Chase Utley were among those using maple for the contest.

8. Why are there more maple bats breaking than ash?


Part of the reason is the wood itself, Schapp said. Wood is made up of cells that identify its texture. Ash wood tends to be a longer, leaner piece of wood. "Ash is longer than maple while maple is more rigid," Schapp said. "When [maple] fails, it's catastrophic." Each piece of wood also contains a percentage of water. The water content usually ranges from 6 to 12 percent in a typical piece of wood at the lumber yard. All Louisville Sluggers -- both maple and ash -- have 12 percent water content. Schapp says Louisville keeps it at 12 percent so the bats won't dry out. Some players speculate that maple has a tendency to break violently because maple is a harder wood. Holman, whose bats contain just 5 percent of water, suggested that the quality of many of the other companies' bats might be subpar, thus increasing the chances of breaking. "I don't know what the other manufacturers do," Homan said. "But to me the quality of wood is not there."

9. What would it take to make the maple bats safer?


Companies are researching that now. Louisville Slugger is currently working with its chemical vendors to find a way to enhance the bats' durability without adding weight. Holman said chemicals have nothing to do with it, and what Major League Baseball needs to do is invest in paying for better wood, which would raise the cost of the bats.

10. What is the difference in cost between a maple and ash bat?


The difference is around $15-$20. Louisville maple bats are currently sold for an average of $65 each, while ash sells for $48.

11. What is the process for ordering bats?


If baseball were to ban maple bats, Schapp said his company would need a minimum of six months to adjust. Schapp's already submitted his 2009 estimates to the timber companies. He says November through January are his busiest months; that's usually when the teams place their official orders for the bats needed in spring training. As for the players, they normally have their team's equipment manager place orders whenever they need more. Sometimes, the players will speak directly with the bat company representatives, who frequently visit baseball clubhouses.

Amy K. Nelson is a staff writer for ESPN.com.